天目湖沙河水库尿素含量及其时空分布特征分析

为探索尿素在淡水生态系统中的作用,于2013年3月—2014年2月调查了江苏溧阳天目湖沙河水库及中田河入库河口中,尿素氮和不同形态氮素的含量和分布特征.结果表明,沙河水库中尿素普遍存在,全库年平均尿素氮浓度为0.016 mg·L-1(0.007—0.029 mg·L-1);河、库尿素氮含量在不同月份波动较大,施肥期的2月、6月、11月含量较高,而在非施肥期含量较低,且河、库含量更加接近;沙河水库尿素氮的空间分布随季节变化而变化,一般在下游旅游集中区和上游靠近农业区出现尿素氮含量高值.此外,沙河水库溶解性氮以无机氮库为主,有机氮占29.09%,硝态氮是库体的主要氮形态;其中尿素氮占总氮、溶解性总氮、溶解性有机氮和生物可利用氮的年平均百分比分别为1.80%、2.21%、8.31%、3.54%.相关分析表明,沙河水库尿素含量与溶解氧含量呈显著负相关,与溶解性有机氮呈显著正相关.研究表明,天目湖沙河水库尿素含量的时空变化主要受外源输入(人类活动)的影响,其时间变化规律与农业活动密切相关,空间分布差异主要受污染源(河道入库口、农业、旅游业和养殖业)分布及其活动的影响.     

贵州镇远提钒尾渣固体废弃物二次资源利用研究

为了开发无尾矿、少尾矿提钒工艺,对贵州镇远江古钒矿实验室扩大试验流程产生的尾矿进行资源化利用研究,尾渣物质组成研究表明:提钒尾渣的主要化学成分为二氧化硅,主要矿物为石英,尾渣放射性检测结果高于建筑物主体墙材中放射性指标的要求,不能直接应用于建筑主体材料.经用尾渣烧成水泥试验结果表明:尾渣烧成的水泥熟料基本化学成分、物理性能测试结果符合GB/T 21372-2008硅酸盐水泥熟料要求.     

基于水域面积法的山区河流水电站下游生态流量定值研究

水电站的大量兴建导致下游河道萎缩退化甚至断流,如何改变水电站运行调度方式,维持下游河道一定的生态流量、保障河流健康成为国内外普遍关注的问题.本文在传统水文学方法的基础上融入生物栖息地法思想,以河流生态系统的生物多样性为功能目标,用河道流量反映河流的水文过程,河道水域面积反映河流生态系统的生物多样性,创新性地提出考虑河道水文生态特性的生态流量定值方法——水域面积法.以北江上游浈江二级支流罗坝水为例进行分析计算.计算结果表明:枯水年罗坝水生态流量为2.26 m3·s-1,占多年平均流量的25.97%;平水年生态流量分月控制,生态流量过程与建站前流量过程基本一致.根据枯水年的生态流量值和平水年各月份的生态流量值,结合水电站的运行调度规则,换算成一定时期内的径流量来确定该时期内水电站需释放的水量,进而对水电站下游河道的生态功能进行保护和修复.     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

飞机氮氧化物排放指数计算方法研究

飞机发动机的噪声和氮氧化物排放已成为日益严重的环境问题,对人类和生态环境的影响越来越严重。自国际民航组织颁布国际民航公约附件16《第Ⅰ卷航空器噪声》和《第Ⅱ卷航空发动机排放物》以来,为控制航空器发动机排放物污染,特别是氮氧化物污染,国际民航组织一直在研究更加严格的发动机排放物限制标准,以减少航空活动中飞机发动机对人类和环境的影响。以实例的形式列举了B787-800在4个阶段氮氧化物排放指数(EINOx)的计算过程,可为我国大飞机氮氧化物排放适航标准提供信息参考。     

Rider preferences and economic values for equestrian trails

Recreational horseback riding is an important, but less studied, component of human interaction with the natural environment and often occurs alongside other outdoor recreational activities. Using choice experiment data collected from a survey conducted in Kentucky, this study assesses rider preferences and economic values associated with various equestrian trail attributes for daylong horseback riding trips in rural trail systems. Results indicate that while individuals have different opinions, trail attributes such as length of trail, scenic views, and travel distance from home all have significant economic implications. In addition, riders prefer trails that are restricted for horse riding only. Willingness to pay estimates of all attributes increase substantially when the travel cost to reach the trail is also considered. Policy implications on maintaining current and creating new trails in a multi-user setting are given, such as the opportunities for separating horseback riders from other users while still providing other beneficial attributes like options for longer trails and scenic views to all groups.     

石油天然气项目管理落实《安全生产法》探析

项目管理是石油天然气生产企业建设项目施工组织的最基本的管理方式。针对建设项目HSE管理存在的问题和短板,文章从建设项目常见问题和风险的分析入手,根据新《安全生产法》(以下简称"新安法")对建设项目的要求,从6个方面分析现阶段石油天然气行业建设项目HSE管理面临的新形势、新要求,针对性地提出加强建设项目HSE管理的主要举措:加强设计源头风险防控、关键环节风险管控、专业化风险管控、施工人员风险管控、施工现场风险管控、投产后期风险管控。对如何强化建设项目全过程风险管控提出建设性意见。     

便携式金属测定仪在环境水质检测中的应用

使用METALYSER HM1000 Heavy Metals Analyser(简称HMA)便携式金属测定仪测定环境水质铜、铅、锌、镉,试验结果表明:HMA便携式金属测定仪检测限满足GB 3838—2002《地表水环境质量标准》除Ⅰ类地表水以外对检测限的要求,准确度和稳定性满足环境水质重金属检测工作的要求,加标回收率符合国标规定,可以在环境水质重金属检测及应急监测工作中推广使用。     

Predicting heavy metals’ adsorption edges and adsorption isotherms on MnO2 with the parameters determined from Langmuir kinetics

Although surface complexation models have been widely used to describe the adsorption of heavy metals, few studies have verified the feasibility of modeling the adsorption kinetics,edge, and isotherm data with one p H-independent parameter. A close inspection of the derivation process of Langmuir isotherm revealed that the equilibrium constant derived from the Langmuir kinetic model, K S-kinetic, is theoretically equivalent to the adsorption constant in Langmuir isotherm, K S-Langmuir. The modified Langmuir kinetic model(MLK model) and modified Langmuir isotherm model(MLI model) incorporating p H factor were developed. The MLK model was employed to simulate the adsorption kinetics of Cu(II), Co(II), Cd(II), Zn(II) and Ni(II) on Mn O2 at p H 3.2 or 3.3 to get the values of K S-kinetic. The adsorption edges of heavy metals could be modeled with the modified metal partitioning model(MMP model), and the values of K S-Langmuir were obtained. The values of K S-kinetic and K S-Langmuir are very close to each other, validating that the constants obtained by these two methods are basically the same. The MMP model with K S-kinetic constants could predict the adsorption edges of heavy metals on Mn O2 very well at different adsorbent/adsorbate concentrations. Moreover, the adsorption isotherms of heavy metals on Mn O2 at various p H levels could be predicted reasonably well by the MLI model with the K S-kinetic constants.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.